Pin V35 Serial

Koneksi antara Modem dengan Router, biasanya memakai interface serial V35. Disamping mulai banyak menggunakan Ethernet sebagai pengembangannya.

Serial V35 diperlukan untuk koneksi antara Router dengan modem ini terbatas pada kecepatan antara 64 Kbps sampai dengan 2048 Kbps.

This document explains the V.35 serial cable assembly and pinouts. Cisco Part#: CAB-V35FC=

60 Pin1	Signal	Description	Direction	34 Pin	Signal
J1-49 J1-48	MODE_1 GND	Shorting group	-	-	-
J1-50 J1-51	MODE_0 GND	Shorting group	-	-	-
J1-53 J1-54 J1-55 J1-56	TxC/NIL RxC_TxCE RxD/TxD GND	Shorting group	-	-	-
J1-46	Shield_GND	Single	-	J2-A	Frame GND
J1-45 Shield	Circuit_GND -	Twisted pair no. 12	- -	J2-B Shield	Circuit GND -
J1-35 Shield	CTS/RTS -	Twisted pair no. 8	-	J2-C Shield	RTS -
J1-42 Shield	RTS/CTS -	Twisted pair no. 9	-	J2-D Shield	CTS -
J1-43 Shield	DTR/DSR -	Twisted pair no. 10	-	J2-E Shield	DSR -
J1-44 Shield	LL/DCD -	Twisted pair no. 11	-	J2-F Shield	RLSD -
J1-34 Shield	DSR/DTR -	Twisted pair no. 7	-	J2-H Shield	DTR -
J1-33 Shield	DCD/LL -	Twisted pair no. 6	-	J2-K Shield	LT -
J1-28 J1-27	RxD/TxD+ RxD/TxD-	Twisted pair no. 5		J2-P J2-S	SD+ SD-
J1-18 J1-17	TxD/RxD+ TxD/RxD-	Twisted pair no. 1		J2-R J2-T	RD+ RD-
J1-26 J1-25	RxC/TxCE+ RxC/TxCE-	Twisted pair no. 4		J2-U J2-W	SCTE+ SCTE-
J1-22 J1-21	NIL/RxC+ NIL/RxC-	Twisted pair no. 3		J2-V J2-X	SCR+ SCR-
J1-20 J1-19	TxCE/TxC+ TxCE/TxC-	Twisted pair no. 2		J2-Y J2-AA	SCT+ SCT-

Arrows indicate signal direction: indicates DTE to DCE, and indicates DCE to DTE.

¹ Any pin not referenced is not connected.